Paralan iS550 User Manual download pdf (Page 12)

Page 12

1.14 In order for your settings to take affect, you will need to reboot the unit. Click

on the Diagnostics tab. On the Diagnostics page, click on “Reboot Device”.

The unit will begin reboot after 5 seconds. Wait until the “Status” LED on the

Bridge turns solid green.

1.15 Once the iS5xx iSCSI Bridge has rebooted and the “Status” LED is solid green

you have successfully configured your iS5xx iSCSI Bridge. If the SCSI bus

settings (see section 5.5) or the Web Port interface access (see section 5.4) is to

be changed, you will need to re-login. See steps 1.8 and 1.9 for instructions on

how to log in.

1.16 It is now time to connect all devices for your final setup. Make sure

all devices on the SCSI side of the system are powered down, i.e. iS5xx iSCSI

Bridge, SCSI drives, and SCSI hosts.

Termination

S CSI

TAPE

SC SI RAID

SCSI BUS

iS5xx iSCSI B RI DGE

iSCSI HOST COMPUTER

10/10 0/1000 ETHERNET

Figure B

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

No comments

Paralan iS550 User Manual Page 12