Paralan iS550 User Manual download pdf (Page 13)

Page 13

1.17 Connect the SCSI devices to the iS5xx iSCSI Bridge.

1.17.1 Connect the cable from the SCSI devices to the 68-pin SCSI port on the

iS5xx iSCSI Bridge.

1.17.2 Make sure the IDs of the SCSI devices connected to the iS5xx iSCSI

Bridge are set to a values other than 7.

1.17.3 Terminate the SCSI bus at the last physical SCSI device. The iS5xx iSCSI

Bridge is terminated internally by default.

1.18 Connect the iS5xx iSCSI Bridge’s Ethernet port to your iSCSI Host computer

via a CAT 5e or CAT 6 cable. If your management computer is functioning as

your iSCSI Host computer, this step can be skipped.

1.19 Turn on your SCSI targets and wait for them to be ready.

1.20 Apply power to the iS5xx iSCSI Bridge.

1.21 Wait until the Status LED on the bridge turns solid green. The iS5xx iSCSI

Bridge will automatically discover all SCSI targets on the bus. If there are no

SCSI targets connected, the “SCSI” LED will constantly pulse. In this case,

see the Troubleshooting section C.b in the Appendices.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 44 45

No comments

Paralan iS550 User Manual Page 13